/
Computer - Dell Command Update

Computer - Dell Command Update

Dell Command Update (DCU) is a Dell utility that allows you to automate driver, BIOS, and firmware updates on your computer. The Dell Command Update tool allows you to keep your computer up to date without you having to know every driver or update needed. It checks your computer and compares it to the available updates on Dell Support for your specific computer.

Instructions

 

  1. Open the Dell Command Update application from the Start menu.

  2. Select Yes run automatically with the default settings.

    image-20251204-185343.png

  3. Click the Check button to allow DCU to check your computer and identify any required updates.

    image-20251204-185403.png

  4. Your computer may have several updates. Select the updates then select Automatically restart system (when required). Then click the Install button.

    image-20251204-185422.png

  5. Once all the updates are installed, click the Close.

    image-20251204-185442.png

Multiple reboots may occur while the updates are installed.

  1. Your computer should now be up to date. Optionally, on the left side of the main screen, Update History can be checked to verify which updates have been installed to date.

    image-20251204-190034.png

  2. (Optional) You can use the settings icon (the small gear icon in the upper-right corner) to set up a schedule to keep the computer updated on a continuous basis.