/
Allworx - Use Conference Center Feature on Handset

Allworx - Use Conference Center Feature on Handset

This article provides step-by-step instructions for accessing and using the Conference Center feature on an Allworx handset or through the Auto Attendant.

Requirements

  • A valid Conference ID and Password.

  • The Conference Center feature must be licensed and enabled on your Allworx system.

Instructions

 

  1. Pick up your Allworx handset or access the system via the Auto Attendant.

  2. Dial extension 408 to reach the Conference Center.

  3. When prompted, enter your Conference ID followed by the # key.

  4. Enter your Password, then press the # key again.

  5. You will be connected to the scheduled conference call.

Conference IDs and passwords are typically generated when a conference is scheduled using the Allworx Admin portal or user portal.

The system may prompt you to record your name for announcement to other participants.

Participants can also dial into the conference from external phones if external access has been configured by the administrator.